Local Roof Coatings Company Serving the Greater Madison WI Area
We understand the importance of protecting and preserving your commercial roof investment. That’s why we offer four exceptional commercial roof coating options that are specifically designed to enhance the longevity of your existing roof. Our coatings not only extend the life of your roof but also improve energy efficiency, waterproof the surface, and effectively reduce the impact of thermal shock and UV degradation. With Feiner Construction LLC, you can rest assured knowing that your commercial roof is in expert hands.
Metal Roof Restoration
What is metal roof restoration?
A complete waterproofing system for metal roofs that inhibits rust, stops leaks, and provides an energy-efficient, long-lasting, and attractive finish coat for years of service. All seams are strengthened with fabric reinforcement embedded into our acrylic elastomeric roof coating. Exposed fasteners are sealed from the elements with premium caulking. The entire roof surface is protected with one of Conklin’s industry-leading roof coatings. The system is an effective method for preserving an existing metal roof without the need for costly metal repair or replacement.
Metal Roof System Application
- Power wash and clean with Rust-Off®.
- Prime with Conklin Encase® Metal Primer.
- Kwik Kaulk® all fastener heads.
- Reinforce existing seams with Spunflex® or Butyl Tape and base coat.
- Seal the entire roof with one of our approved acrylic coatings:
- PUMA® XL
- Benchmark®
- Rapid Roof III
- Rapid Roof® HV
- Completed project.
Full Fabric Restoration
What is Fabric-Reinforced Roofing?
A unique system that waterproofs with a seamless acrylic coating in which a tough, flexible fabric is embedded. This combination makes a rugged, yet lightweight membrane that resists splitting and rupturing—the primary cause of leaks. This system also substantially increases the strength of your roof, extends its life expectancy, and increases the energy efficiency of the building.
Conklin Fabric-Reinforced System Application
Conklin’s Fabric-Reinforced Roofing System is extremely versatile and can be applied to many different roof substrates.
The application procedure will vary depending upon the type of substrate; refer to specification guides or to a contractor well-versed in Conklin’s Fabric-Reinforced System.
Recommended for application over these surfaces:
- EPDM/BUR/Mod-Bit/PVC/TPO
- Exterior Sheeting
- Concrete
- Composite Decking
- ISO Board
- Metal Roof Assemblies
- Membrane Coatings
Membrane Coating System
What is the Membrane Coating System?
A complete waterproofing system that can improve and extend the life of an existing membrane roof. As TPO, EPDM, and other membranes become weathered, rooftops can crack, leak, and pick up dirt, diminishing their effectiveness and energy-saving properties. Conklin’s elastomeric coatings provide a new, cost-effective solution for repairing and preserving approved single-ply membrane roofs, resulting in improved energy-savings.
Conklin Membrane Coating System application
- Power wash and clean with WAC II™ roof cleaner.
- Prime surface with Tack Coat™ primer
- Reinforce seams with Spunflex® embedded in Rapid Roof III® Base Coat or Equinox® Base Coat.
- Seal the entire roof with Rapid Roof III® Top Coat or Equinox® Top Coat.
Single Ply Membranes
What are the Conklin Single-Ply Membrane Systems?
Premium polyvinyl chloride (PVC) and thermoplastic polyolefin (TPO) membrane systems that offer outstanding reflectivity and are resistant to a broad range of chemicals, helping to extend the life of the commercial roof. During installation, single-ply membrane rolls are overlapped and heat welded together along with mechanically fastening or fully adhering with adhesive to form an exceptionally durable, waterproof, and energy-efficient shield that will deliver unsurpassed building protection for years to come.
Professional application of a Conklin Single-Ply Membrane System
- Remove all loose dirt and debris and install boardstock.
- Apply membrane, overlapping seams in the direction of water run-off.
- Weld seams by hand or with a robotic welder.
- Seal free edges of membrane with 360-S® urethane sealant.
Commercial Shingled Roofing
Feiner Construction provides expert commercial shingle and metal roofing services in Madison, WI, and the greater Madison area. A durable, well-installed roof is essential for protecting your business and ensuring long-term performance. We offer a variety of roofing solutions designed to withstand our harsh Madison area weather conditions while improving energy efficiency and aesthetics. Whether you need a new roof installation, roof repairs, or a full roof replacement, our skilled roofers work with precision and professionalism to deliver results that meet your business’s needs and budget. We are local to Madison and service all areas near Madison and the surrounding area. This local Madison building has a new shingled roof – turned out to be a good looking building!
Metal Roofs
Looking for a Metal Roof Company near you? For those looking for a strong, long-lasting roofing option, metal roofs are an excellent choice. Feiner Construction specializes in metal roof installation and replacement, providing superior durability, weather resistance, and energy efficiency. Metal roofing is a low-maintenance solution that can last decades, making it a cost-effective investment for both residential and commercial properties. With various colors and styles available, our roofers can help you achieve a sleek, modern look while enhancing the structural integrity of your building. What a beautiful roof in Arena, WI!
Protect your commercial building with durable, energy-efficient roof coatings. Call 608-574-9555 today for expert installation and long-lasting protection.
Your Local Roofing, Remodeling, and Restoration Company serving the Madison nearby areas from Start to Finish!
Address: 127 South Wood Street
Spring Green WI 53588
- Mon - Fri
- -
- Sat - Sun
- Closed